1. [Water cycle cooling] has changed the original fire robot use water mist cooling, insulation material insulation program, subversive to create a robot chassis surface of the outer circulating water tank, through the water cycle, the rapid radiation to the robot surface heat Quickly taken away, in order to achieve the robot can burst into the fire. (patent)
2. [Characteristics of metal track] compared to all the fire before the robot, in order to pursue a single friction with the ground, are generally used in rubber tracks or wheels. Fire Phoenix perpetual fire robot first to use all-metal track, to achieve the fire robot walking body high temperature! (patent)
3. 【Chassis suspension into a controller position】 After careful analysis of various types of chassis and comparison, found that tanks and other tracks of the load wheel, spacing of about one meter, so boldly omitted the robot chassis suspension system, subversive in the (The battery protection box), and this control box shell, made of track guide track design, the perfect realization of the support and guidance of the role of the track! At the same time, the fire phoenix fire-fighting robot can only carry out the maintenance and repair of the whole robot control system in the side track part, which greatly changes the debugging and maintenance process of the special robot (because the controller is designed in the crawler suspension position, Debugging, do not need to open the top or bottom cover of the robot chassis.) At the same time, to avoid the special robot controller body, the top openings caused by water hidden dangers! - Controller and battery, long-term water immersion, is a huge hidden dangers of reliability! - Phoenix Fire robot, from the principle to avoid this almost impossible to repair the hidden dangers! (patent)
4. 【Automatic Tension Track】 Phoenix robot in order to reduce the customer's track to adjust the amount of maintenance, the first invention on both sides of chassis, "Chassis Control Chassis (and battery protection case)" above the automatic tensioner, through Flexible devices, to achieve automatic wear track wear elastic compensation, greatly facilitate customers! (patent)
5. [Special design of the front and rear bevel] patent chassis front and rear, slope design, appropriate to improve the site through, while convenient internal electrical installation and maintenance. (patent)
6. 【Will carry handle into emergency cavity】 Patented hollow raised his hand into the storage compartment design, cleverly increased the robot's emergency storage space. (patent)
7. [variable weight] Phoenix Fire robot, fully considered both to meet the handling of light, but also has a certain weight, in order to drag the actual needs of the master heavy water, subversive in the robot platform, an increase of variable weight Of the tank (in fact, the use of fire fighting water before the fire extinguishing water to achieve the top of the chassis, with the weight of the dynamic filling tank. After the end of the fire, the allocation of water tanks can be vented at any time) At the same time, the configuration of the water tank or emergency firefighting robot Cooling water reserve tank, to facilitate emergency conditions, the robot cooling medium when the escape needs! (patent)
8 video frequency switch] At the same time, the Phoenix Fire robot, in the video, also uses the 8-way video frequency switching scheme, and 8-way communication frequency selection combination, the maximum can achieve accessibility, 3 km 8 Robots cluster work. (Maximum support 16 bands)
9. [Sleep] energy saving sleep technology, making the work of the robot, turn off the video channel and related wireless circuits, you can maximize energy conservation work, work longer.
10. [multi-communication frequency] can work more than frequency, multiple robots cluster work, do not interfere with each other!
11. 【Folded Antenna】 Fold the antenna, do not take up space! (patent)
12. [Lightning protection against short-circuit] All switch signal input, are designed to prevent lightning circuit, more than a certain voltage, will automatically interfere with the voltage clamp to protect the core chip. But also to a certain extent, improve the anti-jamming ability of the Phoenix robot! The output port adopts opt coupler and pulse overcurrent detection technology. The potential vulnerable devices such as the water cannon motor and motor line, which are vulnerable to blast wave, adopt the perfect protection circuit to realize the failure not to expand and to be easy to maintain and so on.
13. [8 camera reserved] image, the Phoenix Fire robot, reserved for 8-channel camera, you can for customers in different environments, the freedom to choose 2,4,6,8 camera free switch to meet the emergency Conditions, suddenly need to install the camera and other potential emergency needs. At the same time, this feature can also be used to install infrared cameras, easy to quickly find the pipeline leak. Then send the rescue robot to close the valve. (The required camera power cable and video signal cable, will be fully standard in the lift tube, the complimentary!)
14. (Optional function) [gas detection] from 2016.7.1 days, the Phoenix Fire Control Terminal control panel will be equipped with the entire gas detection screen. This function is redundant. Specifically for the often face of gas and other extremely harsh environment of fire fighters and set aside. When necessary, it can be opened. In this way, no need to purchase the second gas detection robot. In other words, the fire forces to buy every fire Phoenix Fire Robots will be a comprehensive gas detection robot. ---- (open upgrade need to pay)
15. (Optional) 【Rescue Robot】 Phoenix high temperature fire robot, support 17 joint control. You can choose to upgrade to a large grasp of the rescue robot. It can replace people into high-risk fire, explosion, toxic environment, the implementation of tasks such as closing the valve, reducing the probability of secondary explosion site of the accident. (Japan's Tokyo Electric Power Company's Fukushima nuclear power plant, because there is no time to send people to close the valve, leading to serious secondary explosion accident)
16 [2-way fire output] Phoenix high temperature fire robot, and even designed with 2-way lock, a laser targeting function of the fire switch to facilitate customers to expand the upgrade function. (Such as the use of robots to destroy explosives, reduce the explosion of suspected explosives caused by the masses and duty personnel large area of casualties) (Motherboard default with this feature, but not the signal leads to the future will be fully standard!
【Chassis mechanical performance parameters】:
Length: 1300 mm
Width: 630 mm (can be customized)
Height 325mm (excluding signal towers, cooling water pipes and other accessories height)
Note: the size can be customized!
【Electrical performance parameters】:
Communication distance: accessibility up to 3KM
Communication frequency selection: 3 switch control Select 8 frequency.
Video transmission distance: 300 to 400 meters maximum accessibility (the module can be paid to upgrade)
8 Video frequency switching: (optional)
Video circuit Wireless remote control Sleep (optional)
Robot chassis black gate recording function (optional)
Number of cameras: 8 open (available chassis switch selection 2,4,6,8 Road) (original 3 cameras, the rest need to be allocated)
External camera 12V with sleep power supply system (standard)
Chassis standard camera angle: 170 ° before a 1, after 170 ° two (standard)
Highlight chassis front and rear lights: front 6W * 4; after 6W * 4 (standard)
Highlight signal reception indicator: 6W * 1 (standard)
Firing output signal: 2-way (optional)
Fin height of the maximum 350mm (standard)
Electric fins (optional)
Quick change battery system (standard)
Metal track system (standard)
Water circulation Chassis cooling system (standard)
Folding antenna system (standard)
Automatic tensioning track system (standard)
Multi-functional lifting storage system (standard)
Operating voltage: DC30V or less (intrinsically safe voltage)
Variable weight water tank: (only when installing fire extinguisher optional)